Cart: 0 item(s) - £0.00

Patio Black Spot Remover for Artificial Stone - 2 Litres

Select Patio Black Spot Remover for Artificial Stone for use on Manufactured or Artificial Stones such as Marshalls, bricks, Bradstone and Haddon Stone. Will also work successfully on external marble, all cementitious based and all pre cast patio slabs. DO NOT USE TO TREAT BLOCK PAVING. SELECT PATIO BLACK SPOT REMOVER FOR BLOCK PAVING!! This product will treat a maximum area of 9 square metres.
Product Code : ART02
Send to a friend

Patio Black Spot Remover is currently the only product developed specifically to remove those hideous ‘Black Spots’ and restore the natural colour your garden stonework. Patio Black Spot Remover for Artificial Stone will remove ‘Black Spots’ from garden ornaments and all pre cast patio slabs including Marshalls, Bradstone, Haddonstone and other cementatious based slabs.

To maintain your garden stonework and stop the ‘return of the Black Spots’, buy and apply our Patio Black Spot Preventer annually. This will kill any ‘Black Spot’ spores before they have the chance to germinate and turn into spots and will also remove green algae without the need to power wash!
Prior to use, pre wash the affected area to remove any loose debris ensuring the Patio Black Spot Remover can come into direct contact with the Black Spots and stone’s surface.  Apply on a cool day, if it dries too quickly the performance will be reduced, on a hot day apply in the evening and allow to dwell overnight. Only apply when the surface is dry, do not apply when threat of rain is imminent.   
1/  Use neat – DO NOT DILUTE – Pour our solution into a pneumatic garden sprayer. Pressurize the sprayer.
2/ Using a fine mist spray apply a flood coat, working in sweeping strokes across the stonework. Immediately after apply a second continuous pass at right angles to the first to ensure complete coverage.
3/ DO NOT EXCEED THE MAXIMUM RECOMMENDED COVERAGE OF 4.5 SQUARE METRES PER LITRE. Exceeding the recommended coverage rate will reduce the performance of this product. Coverage will vary depending on surface porosity and profile, e.g when treating sloping areas or riven surface, beware of surface run off and retreat as necessary to ensure correct coverage.
4/ Allow to cure for a minimum period of 90 minutes. In cases of severe infestation or when treating very porous stone allow the product to dwell overnight.
5/ Remove using a pressure washer ideally with a minimum flow of 7 litres per minute. Use the fan jet attachment approximately 50mm from the surface. Adjust this distance to suit your application.
6/ Retreat if necessary to remove any remaining Black Spots or ‘Ghosting’. You must allow the surface to dry before retreating.
The Patio Black Spot Remover is quickly and readily biodegradable. The effluent if washed into soil, flower beds or lawn will breakdown rapidly. This product will not affect surrounding lawns or foliage in diluted state. Keep animals and unprotected persons off the treated area until dry. 
Ensure this product does not come into contact with fabrics or furnishings.

Write an online review and share your thoughts with other shoppers!

Mrs Bowden--5 Stars

Amazing product!!! Nothing you can purchase in DIY shops even comes close to this product!!! Cannot recommend enough!!

Pheobe Tamsley--5 Stars

Patio Black Spot Removal Company entered a competition for one lucky Round & About magazine winner to WIN a free patio clean. I was that very proud winner and was so pleased with the final results from Patio Black Spot. Thank you so much

Sign up for our newsletter